Enerdrive ePOWER B-TEC 100Ah Slimline Lithium Battery & 40A DC2DC Battery Charger, 5 Year Warranty.
- Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery EPL-100BT-12V-SLIM
- Enerdrive ePOWER 12V 40A DC to DC Battery Charger EN3DC40+
Enerdrive ePOWER B-TEC 100Ah Slim Lithium Battery:
Enerdrive B-Tec 100AH Slim Battery is an ideal solution for those who are limited for space. It can be well positioned behind the back seat of most dual cab utes or narrow spaces in other locations. The limited edition B-Tec 100Ah Slim Lithium has the same DNA boasts as all other Enerdrive B-Tec batteries. With high quality prismatic cells and suitable for up to 1000 Watt inverter with the best aftersales support program in Australia.
The ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
100Ah Lithium = 160Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please Note: This ePOWER B-TEC lithium battery is capable to be paralleled to a second ePOWER B-TEC lithium battery. For maximum performance and lifespan of your lithium battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
*Note: As stipulated by the manufacturer Enerdrive, failure to charge the Enerdrive Lithium Battery range with an Enerdrive or Redarc Lithium Profile battery charger will void Enerdrive manufacturer warranty.
|Amp Hours (Ah)||100.0 Ah|
|Charger Mode Output Voltage||13.8V – 15.5V (Battery Charger)|
|Float||13.50 – 13.80V (Battery) | 13.0V – 13.8V (Battery Charger)|
|Equalize||15.5V (Battery Charger)|
|Charging Control||Three Stages (Battery Charger)|
|DC Output||Single (Battery Charger)|
|Selectable Battery Type||Gel, AGM, Flooded, Lithium, Program (Battery Charger)|
|Charger Efficiency||95% (Battery Charger)|
|Temperature Setting||Low/ Normal/ High (Battery Temperature Sensor Standard) (Battery Charger)|
|Model||EPL-100BT-12V-SLIM (Battery) | EN3DC40+ (Battery Charger)|
|Nominal Voltage||12.8V (Battery)|
|Nominal Capacity||100Ah (Battery)|
|Total Charge Current||Max 80A @ 25°C for 30mins (Battery)|
|Cycle Life (DOD – 80% under controlled conditions)||≥ 2000 Cycles (Battery)|
|Battery Charge Temperature||0 ̴ 45°C (Battery)|
|Normal Charge Voltage CV/CC*||14.40 ̴ 14.60V (Battery)|
|Standby (Float) Voltage||13.50 ̴ 13.80V (Battery)|
|Maximum Charge Current||80A @ 25°C for 30mins (Battery)|
|Battery Discharge Temperature||-20 ̴ 60°C (Battery)|
|Dimensions||Battery: 551 x 101 x 239 mm | DC to DC Charger: 242 x 172 x 74 mm (L x W x H)|
|Net Weight (kg)||14.5 Kg|
|Manufacturers Warranty||5 Years|